Search Results

This SAE Standard describes head position contours and procedures for locating the contours in a vehicle. Head position contours are useful in establishing accommodation requirements for head space and are required for several measures defined in SAE J1100. Separate contours are defined depending on occupant seat location and the desired percentage (95 and 99) of occupant accommodation. This document is primarily focused on application to Class A vehicles (see SAE J1100), which include most personal-use vehicles (passenger cars, sport utility vehicles, pick-up trucks). A procedure for use in Class B vehicles can be found in Appendix B.

This document provides technology, terminology, and procedural definitions common in Motor Vehicle seat design and testing.

This Standard provides the specifications and procedures for using the H-point machine (HPM1) to audit vehicle seating positions. The HPM is a physical tool used to establish key reference points and measurements in a vehicle (see Figure 1 and Appendix A). The H-point design tool (HPD) is a simplified CAD2 version of the HPM, which can be used in conjunction with the HPM to take the optional measurements specified in this document, or used independently during product design (see Appendix D). These H-point devices provide a method for reliable layout and measurement of occupant seating compartments and/or seats. This document specifies the procedures for installing the H-point machine (HPM) and using the HPM to audit (verify) key reference points and measurements in a vehicle. The devices are intended for application at designated seating positions. They are not to be construed as tools that measure or indicate occupant capabilities or comfort.

This SAE Recommended Practice defines a set of measurements and standard procedures for motor vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way. In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property. It is intended that the dimensions and procedures described in this practice be generic in their application to both the HPM, described in SAE J826, and the HPM-II, described in SAE J4002. In some circumstances, the figures may only reflect one or the other.

This SAE Standard describes head position contours and procedures for locating the contours in a vehicle. Head position contours are useful in establishing accommodation requirements for head space and are required for several measures defined in SAE J1100. Separate contours are defined depending on occupant seat location and the desired percentage (95 and 99) of occupant accommodation. This document is primarily focused on application to Class A vehicles (see SAE J1100), which include most personal-use vehicles (passenger cars, sport utility vehicles, pick-up trucks). A procedure for use in Class B vehicles can be found in Appendix B.

The devices of this SAE Standard provide the means by which passenger compartment dimensions can be obtained using a deflected seat rather than a free seat contour as a reference for defining seating space. All definitions and dimensions used in conjunction with this document are described in SAE J1100. These devices are intended only to apply to the driver side or center occupant seating spaces and are not to be construed as instruments which measure or indicate occupant capabilities or comfort. This document covers only one H-point machine installed on a seat during each test. Certified H-point templates and machines can be purchased from: SAE International 400 Commonwealth Drive Warrendale, PA 15096-0001 Specific procedures are included in Appendix A for seat measurements in short- and long-coupled vehicles and in Appendix B for measurement of the driver seat cushion angle. Specifications and a calibration inspection procedure for the H-point machine are given in Appendix C.

Benchmarking is used to discover the design intent measurements for seating compartments in vehicles when these measurements are either unknown or are specified using differing measurement procedures. This document provides the specifications and procedures to establish consistent measurements for benchmarking vehicle seating positions using the H-Point Machine (HPM-II1) described in SAE J4002 and the H-Point Design tool (HPD) described in SAE J4004. The HPM-II is a physical tool used to establish key reference points and measurements in a vehicle (Figure 1). The HPD is a CAD tool that aids in the benchmarking process (see Appendix A and SAE J4004).

This SAE Recommended Practice describes how to position and posture the H-point design tool (HPD) described in Appendix B, and how to establish the seating reference point (SgRP), design H-point travel path, and other key reference points that are used in the design and specification of both driver and passenger seat positions. This practice also provides a method for determining the length of the seat track for a driver seat that adjusts fore/aft. The seat track length is based on a desired level of driver accommodation, assuming a U.S. population containing an equal number of male and female drivers. The procedure can be used to establish driver seat track accommodation for new vehicle designs or to evaluate accommodation in existing vehicles. A general method for determining driver seat track length for any driver population (male and female stature distribution) at any selected accommodation percentile and gender mix is given in Appendix A.

This document provides dimension definitions that facilitate geometric quantification and evaluation of seats. Dimensions described in this document have been designed to be measured in a CAD environment; however, many dimensions require the HPM position and attitude. This can be obtained by physically establishing H-point using benchmark or auditing procedures OR by measuring the HPD within a CAD or modelling system. Refer to the appropriate document for these procedures. These dimensions are package independent in that they do not require use of the HPM-II supplemental thigh/leg/shoe. Three types of seat geometry reference points and measurements have been developed: Simple reference points and measurements not related to H-point. H-point dependent reference points and measurements that utilize the seat characterization capabilities of the HPM to quantify seat measurements. Cross sectional seat trim outlines.

The devices of this SAE Standard provide the means by which passenger compartment dimensions can be obtained using a deflected seat rather than a free seat contour as a reference for defining seating space. All definitions and dimensions used in conjunction with this document are described in SAE J1100. These devices are intended only to apply to the driver side or center occupant seating spaces and are not to be construed as instruments which measure or indicate occupant capabilities or comfort. This document covers only one H-point machine installed on a seat during each test. Certified H-point templates and machines can be purchased from: SAE International 400 Commonwealth Drive Warrendale, PA 15096-0001 Specific procedures are included in Appendix A for seat measurements in short- and long-coupled vehicles and in Appendix B for measurement of the driver seat cushion angle. Specifications and a calibration inspection procedure for the H-point machine are given in Appendix C.

This SAE Recommended Practice defines a set of measurements and standard procedures for motor vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way. In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property. It is intended that the dimensions and procedures described in this practice be generic in their application to both the HPM, described in J826, and the HPM-II, described in J4002. In some circumstances, the figures may only reflect one or the other.

Benchmarking is used to discover the design intent measurements for seating compartments in vehicles when these measurements are either unknown or are specified using differing measurement procedures. This document provides the specifications and procedures to establish consistent measurements for benchmarking vehicle seating positions using the H-Point Machine (HPM-II1) and H-Point Design tool (HPD) described in SAE J4002. The HPM-II is a physical tool used to establish key reference points and measurements in a vehicle (Figure 1). The HPD is a CAD tool that aids in the benchmarking process (see Annex A and SAE J4004).

This SAE Recommended Practice describes how to position and posture the H-point design tool (HPD) described in Appendix B, and how to establish the seating reference point (SgRP), design H-point travel path, and other key reference points that are used in the design and specification of both driver and passenger seat positions. This practice also provides a method for determining the length of the seat track for a driver seat that adjusts fore/aft. The seat track length is based on a desired level of driver accommodation, assuming a U.S. population containing an equal number of male and female drivers. The procedure can be used to establish driver seat track accommodation for new vehicle designs or to evaluate accommodation in existing vehicles. A general method for determining driver seat track length for any driver population (male and female stature distribution) at any selected accommodation percentile and gender mix is given in Appendix A.

This Standard provides the specifications and procedures for using the H-point machine (HPM1) to audit vehicle seating positions. The HPM is a physical tool used to establish key reference points and measurements in a vehicle (see Figure 1 and Appendix A). The H-point design tool (HPD) is a simplified CAD2 version of the HPM, which can be used in conjunction with the HPM to take the optional measurements specified in this document, or used independently during product design (see Appendix D). These H-point devices provide a method for reliable layout and measurement of occupant seating compartments and/or seats. This document specifies the procedures for using the H-point machine (HPM) to audit (verify) key reference points and measurements in a vehicle. The devices are intended for application at designated seating positions. They are not to be construed as tools that measure or indicate occupant capabilities or comfort.

The devices described in this document provide a method for a reliable layout and measurement of occupant seating compartments and/or seats. They are not to be construed as tools that measure or indicate occupant capabilities or comfort. The devices are intended for applications at designated seating positions. They are not intended for use in defining or assessing temporary seating, such as folding jump seats. When using the H-Point Machine (HPM), interactions can occur between adjacent seating positions (i.e., having an HPM installed at the center occupant position can change the results obtained for the outboard occupant position). Therefore, only one machine should be installed in a particular row of seats during each test.

This SAE Recommended Practice describes head position contours and procedures for locating the contours in a vehicle. Head position contours are useful in establishing accommodation requirements for head space and are required for several measures defined in SAE J1100. Separate contours are defined depending on occupant seat location and the desired percentage (95 and 99) of occupant accommodation. This document is primarily focused on application to Class A vehicles (see SAE J1100), which include most personal-use vehicles (passenger cars, sport utility vehicles, pick-up trucks). A procedure for use in Class B vehicles can be found in Appendix B.

This SAE Recommended Practice defines a set of measurements and standard procedures for vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way. In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property. Unless otherwise specified, all dimensions are measured normal to the three-dimensional reference system (see SAE J182), except ground-related dimensions, which are defined normal to ground. All dimensions are taken with the vehicle at curb weight unless otherwise specified. All dimensions are measured on the base vehicle and do not include Regular Production Options (RPO) or accessory parts, unless otherwise specified.

The devices described in this document provide a method for a reliable layout and measurement of occupant seating compartments and/or seats. They are not to be construed as tools that measure or indicate occupant capabilities or comfort. The devices are intended for applications at designated seating positions. They are not intended for use in defining or assessing temporary seating, such as folding jump seats. When using the H-Point Machine (HPM); interactions can occur between adjacent seating positions (i.e., having an HPM installed at the center occupant position can change the results obtained for the outboard occupant position). Therefore, only one machine should be installed in a particular row of seats during each test.

This SAE Recommended Practice defines a uniform set of interior and exterior dimensions for passenger cars, multipurpose passenger vehicles, and trucks.

This SAE Recommended Practice establishes the location of both driver and passenger heads inside a vehicle for the purpose of describing spatial requirements. Driver lateral head position includes head movement looking to the left and right while driving. Elliptical (head position contour) models in both two and three dimensions are used to represent 95th and 99th percentiles of driver and passenger head locations. This document describes two different procedures for locating driver head position contours, depending on whether or not the driver workspace is like that found in a passenger car or a heavy truck. The need for two different procedures has led to a vehicle classification scheme which labels vehicles as either Class A (passenger cars) or Class B (heavy trucks) according to definitions given in SAE J1100 APR97.